Troubleshooting Tips
Latest Troubleshooting Tips Articles
-
No, it is not necessary to oil the motor. The bearings are pre-lubricated for life.
Taking in to account the size of the felt paper, shingles and roofing deck, the nails should always penetrate the roof deck. If the nails do not penetrate the roof deck, the vent can start to
...All Air Vent products are designed for sloped roofs with a minimum 3/12 pitch. Unfortunately, Air Vent products are not designed for flat roofs.
With any attic ventilation system, the attic could be about 20 degrees hotter than it is outside. Attic ventilation is meant to protect the roof sheathing, insulation and shingles from
...Air Vent recommends 1 square foot of attic ventilation for every 150 square feet of attic floor space divided evenly between intake vents at the roof’s edge or in the overhang or undereave
...